MR5000 Inverted metallographic microscope
MR5000 inverted metallographic microscope adopts high quality infinite distance optical system, and is equipped with long working distance flat field flat field achromatic objective lens for light and dark field, and multi-light path system design, which can support both binocular tube observation and digital camera observation.
MR5000 inverted metallographic microscope can be widely used to study the microstructure of metals. It can observe and photograph under bright field, dark field, polarized light and differential interference. It is equipped with special software and can also carry out measurement and analysis simultaneously.
It can be used for metallographic experiments in metal science and heat treatment, metal physics, steelmaking and casting process in research units, metallurgy, machinery manufacturing plants and higher industrial colleges.
MR5000 Inverted metallographic microscope
name | specifications | configuration | |
The optical system | Infinite distance optical system | ● | |
The main machine | MR5000Inverted metallographic microscope host | ● | |
Observers cylinder | Hinged binocular barrel, 45° inclined; | ● | |
Spectrophotometric ratio: observe 80% photography 20% or observe 100% or photograph 100% | |||
The eye lens | 10X/Φ22mm Wide field eyepiece； | ● | |
15X/Φ16mm Wide field eyepiece | ○ | ||
20X/Φ12mm Wide field eyepiece | ○ | ||
10X/Φ20mm Micrometer eyepiece with cross division (0.1mm) | ● | ||
Objective lens converter | Five-hole objective lens converter | ● | |
Content mirror | Infinite distance long working distance Flat field achromatic objective lens (general for light and dark fields) | 5X/0.12 Effective working distance: 10mm | ● |
10X/0.25 Effective working distance: 10mm | ● | ||
20X/0.4 Effective working distance：5mm | ● | ||
50X/0.75 Effective working distance:1.3mm | ● | ||
100X/0.90 Effective working distance: 0.7mm | ● | ||
Focusing mechanism | Coarse micro coaxial focus fine tuning lattice value：0.002mm | ● | |
Stroke (from the surface focus of the carrier) : 1mm up, 7mm down | ● | ||
Object table | Mesa dimension：226mm×178mm | ● | |
Two plate-pressing pieces | ● | ||
Small platform: water droplet, small hole, big hole each one | ● | ||
Mechanically moving platform | Moving range：40mm×40mm | ● | |
According to Ming | 12V50 halogen lamp with continuously adjustable center and brightness | ● | |
Differential interference | Applicable to 5X, 10X, 20X, 50X, 100X objective lens | ○ | |
Color filter | Built-in turntable type (green, blue, yellow, grey, slide) | ● | |
Attach | The partial mirror | ● | |
Objective microscale (accuracy: 0.01mm) | ● | ||
Adjusting the objective lens in the lamp room | ● | ||
Digital camera adaptor | ○ | ||
Transfer CCD lens | ● | ||
Digital CCD industrial camera and measurement software, metallographic analysis software | ● | ||
Note: ● Standard configuration ○ for optional match
Shanghai Dilun Optical Instrument Co., Ltd.
Customer service call：021-51827979
Sales Department: Xiao Xin-fu 13564000623
Maintenance department: Mr. Yu 17621222474
Customer service call：021-51827979
Domestic web site: www.shdlgx.com
Mail box: teelen@sina.cn
